HYDREX Specialty

HYDREX™ Specialty

Specialty formulated for extreme conditions

  • HYDREX MV Arctic 15 for use in extremely cold temperature conditions.
  • HYDREX Extreme for severe low and high temperature hydraulic oil protection for year round conditions.
  • HYDREX DT is a special anti-wear detergent/dispersant hydraulic oil for systems prone to contamination.

  • HYDREX MV Arctic 15 is readily biodegradable.
  • HYDREX Extreme can withstand wide temperature fluctuations, allowing for inventory consolidation.
  • HYDREX DT is a high quality, long lasting fluid.

HYDREX Specialty

HYDREX MV ARCTIC 15

  • For extremely cold temperatures.
  • Recommended for use in critical low temperature systems
  • Anti-wear hydraulic oil characteristics extend equipment life
  • Water separability and hydrolytic stability without loss of performance additives
  • Rust and corrosion protection against water damage
  • Readily biodegradable as measured by OECD 301B
  • Allows hydraulic oil systems to start at temperatures as low as -50°C/-58°F, with operating range between -45°C/-49°F and 23°C/73°F

Applications

  • Recommended for vane, gear and axial piston hydraulic pumps for applications requiring ISO viscosity grades 10 and 15
  • Recommended for use in emergency shutdown valves or other critical low temperature heavy-duty hydraulic systems required to respond quickly and reliably
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Suitable for use in equipment manufactured by Bosch-Rexroth

Denison

  • Suitable for use in equipment manufactured by Denison

Dynex

  • Suitable for use in equipment manufactured by Dynex

Eaton

  • Suitable for use in equipment manufactured by Eaton Vickers

Hydreco

  • Suitable for use in equipment manufactured by Hydreco

Oilgear

  • Suitable for use in equipment manufactured by Oilgear

Racine

  • Suitable for use in equipment manufactured by Racine

Sauer-Danfoss

  • Suitable for use in equipment manufactured by Sauer-Danfoss

HYDREX EXTREME

  • For severe low and high temperature hydraulic oil protection for year round conditions.
  • For extremely wide temperature protection ranging from high to severely low temperatures.
  • Oxidation stability extends time between hydraulic oil changes
  • Minimizes sludge build-up that can lead to wear and shorter hydraulic filter life
  • Allows hydraulic systems to start at temperatures -49°C/-56°F, with operating range between -32°C/-26°F and 64°C/147°F

Applications

  • Recommended for vane, gear and axial piston hydraulic pumps over an extremely wide range of operating temperatures
  • Suitable for applications where systems must be started up at very low temperatures but have higher temperatures during operation
  • Suitable for use in bucket trucks operating around power lines or in bucket truck hydraulic systems requiring extreme low temperature pumpability

OEM Approvals

Bosch Rexroth

  • Suitable for use in equipment manufactured by Bosch-Rexroth

Denison

  • Suitable for use in equipment manufactured by Denison

Dynex

  • Suitable for use in equipment manufactured by Dynex

Eaton

  • Suitable for use in equipment manufactured by Eaton Vickers

Hydreco

  • Suitable for use in equipment manufactured by Hydreco

Liebherr

  • Suitable for use in equipment manufactured by Liebherr

Oilgear

  • Suitable for use in equipment manufactured by Oilgear

Racine

  • Suitable for use in equipment manufactured by Racine

Sauer-Danfoss

  • Suitable for use in equipment manufactured by Sauer-Danfoss

HYDREX DT 46

  • HYDREX DT to help prevent contamination
  • Contains special detergent for hydraulic systems prone to contamination
  • Same anti-wear chemistry as our HYDREX AW line for extended equipment life
  • Oxidation and thermal stability help extend time between oil changes
  • Water separability and hydrolytic stability allow oil to be reused
  • Improved foam and air entrainment performance

HYDREX MV ARCTIC 15

  • For extremely cold temperatures.
  • Recommended for use in critical low temperature systems
  • Anti-wear hydraulic oil characteristics extend equipment life
  • Water separability and hydrolytic stability without loss of performance additives
  • Rust and corrosion protection against water damage
  • Readily biodegradable as measured by OECD 301B
  • Allows hydraulic oil systems to start at temperatures as low as -50°C/-58°F, with operating range between -45°C/-49°F and 23°C/73°F

Applications

  • Recommended for vane, gear and axial piston hydraulic pumps for applications requiring ISO viscosity grades 10 and 15
  • Recommended for use in emergency shutdown valves or other critical low temperature heavy-duty hydraulic systems required to respond quickly and reliably
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Suitable for use in equipment manufactured by Bosch-Rexroth

Denison

  • Suitable for use in equipment manufactured by Denison

Dynex

  • Suitable for use in equipment manufactured by Dynex

Eaton

  • Suitable for use in equipment manufactured by Eaton Vickers

Hydreco

  • Suitable for use in equipment manufactured by Hydreco

Oilgear

  • Suitable for use in equipment manufactured by Oilgear

Racine

  • Suitable for use in equipment manufactured by Racine

Sauer-Danfoss

  • Suitable for use in equipment manufactured by Sauer-Danfoss
Case Study

“The technical services & support make Petro-Canada more of a partner to us….”

Lonny Syvret,
Maintenance Superintendent,
Agnico Eagle

ReadCase Study

Related Product Lines

Get the latest HYDREX™ Specialty product info and more.

Join our subscribers. It's free. Unsubscribe anytime.

By submitting this form, you agree to the storage and handling of this data in accordance with our Privacy Policy.

Welcome and thanks for joining.

You're all set to start getting the latest content in your inbox.