Find your Country and language
Lubricants Beyond Today's Standards TM
Petro-Canada™ Lubricants' distribution network extends to over 80 countries worldwide
This website uses cookies. By continuing to browse this website you are agreeing to our use of cookies. Find out more by reading our privacy policy.
Excluding the regions of Crimea, Donetsk and Luhansk
Petro-Canada™ Lubricants' distribution network extends to over 80 countries worldwide
About Charlotte Pipe
Charlotte Pipe and Foundry is headquartered in Charlotte, N.C. and has seven plant locations across the United States. The nation’s leading maker of cast iron and plastic pipe and fittings for plumbing applications, Charlotte Pipe and Foundry has been in continuous operation since 1901 and remains privately held.
Dave Feggestad,
Plant Manager,
Charlotte Pipe
(PDF, 263 KB)
"A lot of unnecessary problems... oxidizing, breaking down prematurely and leaving a lot of sludge build-up in oil tanks and extruders."
– Dave Feggestad, Plant Manager
“When we tested CALFLO™ AF in the same system, we noticed that it didn’t have any of these problems. CALFLO AF has a longer fluid life, stands up better to higher temperatures and doesn’t create any sludge. With CALFLO AF, we only have to change-out our heat transfer systems once a year.”
– Dave Feggestad, Plant Manager
Interested in our line of products? Where To Buy
[1] Suitable for Use = Determined to be suitable based on engineering judgment supported by test data such as laboratory or field testing.
[2] Always consult the vehicle owner’s manual for specific transmission fluid recommendations.
[3] Not recommended for CVT and DCT transmissions or when a non-friction modified fluid is recommended (e.g. Ford Type F). Some e-CVT designs require the use of Automatic Transmission Fluids; therefore, DuraDrive MV Synthetic ATF is suitable for use where "Suitable for Use" is claimed for the appropriate ATF Specification/Vehicle.
[4] [5] [7] Except AWTF80-SC transmissions or MY 2008—2010 V70
[6] [8] DuraDrive MV Synthetic ATF is a high viscosity formulation and does not meet the viscosity profiles of these low viscosity specifications. Field testing results have demonstrated proof of no harm but product will not provide the potential fuel economy benefits of the low viscosity genuine oils.
† MERCON® is a registered trademark of Ford Motor Company.
# ATF+3® is a trademark of FCA US LLC, used under license.
§ DEXRON® is a registered trademark of General Motors LLC.