• Ultra High Performance synthetic motor oils for ultimate engine protection.
• Outstanding resistance to thermal breakdown and oil thickening.
• Reduced oil consumption; less top-up required.
• Exceptional low temperature fluidity.
• Assured protection against low speed pre-ignition (LSPI) through the drain interval.

• Licensed API Service Category SQ Resource Conserving.
• Exceed ILSAC GF-7A or ILSAC GF-7B (0W-16 grade only) standard.
• 5W-30 meets Ford WSS-M2C971-A1.
• 0W-20 meets Ford WSS-M2C972-A1.
• 0W-20 and 5W-30 are suitable for use for Chrysler MS-6395.
• Meets specifications for Asian OEMs (including, but not limited to, Honda, Hyundai, Kia, Mazda, Nissan, Toyota) where ILSAC GF-x and/or API Sx is listed as the recommended lubricant in the OEM owner's manual.
• 0W-20 and 5W-30 are GM dexos^® 1 Gen 3 approved.

• Super High Performance synthetic motor oils deliver exceptional performance and engine protection, even in difficult driving conditions.
• All weather performance helps provide improved engine starts and better protection.
• Excellent resistance to thermal breakdown.
• Protection against LSPI through the drain interval.

• 0W-20, 0W-30, 5W-20 and 5W-30 are API licensed API SQ Resource Conserving, ILSAC GF-7A.
• 5W-40 is API licensed API SQ.
• 5W-20 meets Ford WSS-M2C970-A1.
• 5W-30 meets Ford WSS-M2C971-A1.
• 0W-20 meets Ford WSS-M2C972-A1.
• 0W-30 meets Ford WSS-M2C973-A1.
• 0W-20, 5W-20 and 5W-30 are suitable for use for Chrysler MS-6395.
• Meets specifications for Asian OEMs (including, but not limited to, Honda, Hyundai, Kia, Mazda, Nissan, Toyota) where ILSAC GF-x and/or API Sx is listed as the recommended lubricant in the OEM owner's manual.

• High Performance synthetic blend motor oil that keeps engines protected.
• Excellent low temperature performance.
• Protection against oil oxidation and engine wear even under high engine temperatures.
• LSPI protection through the drain interval.

• 5W-20, 5W-30 and 10W-30 are API licensed API SQ Resource Conserving, ILSAC GF-7A.
• 10W-40 and 20W-50 are API licensed API SQ.
• 5W-20 meets Ford WSS-M2C970-A1.
• 5W-30 meets Ford WSS-M2C971-A1.
• 5W-20, 5W-30 and 10W-30 are suitable for use for Chrysler MS-6395.
• Meets specifications for Asian OEMs (including, but not limited to, Honda, Hyundai, Kia, Mazda, Nissan, Toyota) where ILSAC GF-x and/or API Sx is listed as the recommended lubricant in the OEM owner's manual.

• Designed to clean up sludge in vehicles with high mileage.
• Rejuvenates your engine’s power that is lost due to blow-by.
• Reduces the formation of new deposits on engine parts, resulting in a cleaner running engine.
• Meets the latest industry standards.

• Exceeds API SQ Resource Conserving as well the latest ILSAC GF-7A specification.
• 5W-20 and 5W-30 are suitable for use for Chrysler MS-6395.
• 5W-20 meets Ford WSS-M2C970-A1.
• 5W-30 meets Ford WSS-M2C971-A1.
• Meets specifications for Asian OEMs (including, but not limited to, Honda, Hyundai, Kia, Mazda, Nissan, Toyota) where ILSAC GF-x and/or API Sx is listed as the recommended lubricant in the OEM owner's manual.

Exceptional protection for internal combustion (IC) engines in a hybrid powertrain including:

• Outstanding protection against wear, rust and corrosion during frequent stop/start cycles prevalent with hybrid vehicles, extending bearing and engine life.
• Easier unaided cold weather starts and reduced wear during low temperature start-up and operation due to our best low temperature fluidity.
• Our best resistance to high temperature thermal breakdown resulting in cleaner running engines.

• Licensed API SQ Resource Conserving.
• 0W-20 exceeds ILSAC GF-7A requirements and is GM dexos^® 1 Gen 3 approved.
• 0W-20 is suitable for use for Chrysler MS-6395.
• 0W-20 meets Ford WSS-M2C972-A1.
• Meets specifications for Asian OEMs (including, but not limited to, Honda, Hyundai, Kia, Mazda, Nissan, Toyota) where ILSAC GF-x and/or API Sx is listed as the recommended lubricant in the OEM owner's manual.
• 0W-16 exceeds ILSAC GF-7B requirements.

• Fuel saving synthetic motor oil that is produced with high quality synthetic base oils and an advanced additive system.
• Exceeds the ACEA C3 requirements for gasoline and light-duty diesel engines.
• Meets the requirements of ACEA C3-23, API SN/CF, as well as European OEM specifications, including MB 229.31/229.51/226.5, Porsche A40, BMW LL-04, VW 502 00, 505 00, 505 01, Renault RN0700/RN0710 and Ford M2C917-A.
• AVAILABLE ONLY IN EUROPE AND OTHER SELECT GEOGRAPHIES.

• High performance synthetic passenger car engine oil with a carefully balanced selection of synthetic base oils and advanced additive chemistry that protects gasoline catalytic converters and diesel particulate filters.
• Meets the performance requirements of ACEA C3, API SP and is specially designed to support extended oil drain intervals of modern engines.
• Exceeds the ACEA C3 requirements for fuel economy performance.
• MB-Approval 229.31.
• AVAILABLE ONLY IN EUROPE AND OTHER SELECT GEOGRAPHIES.

• Synthetic, top quality “Mid SAPS”* passenger car motor oil that delivers outstanding performance and protection when lubricating today’s modern engines.
• Delivers exceptional resistance to thermal breakdown, outstanding low temperature fluidity and excellent engine protection at extreme operating temperatures.
• Meets the performance requirements of ACEA C3, API SN, BMW LL-04 specifications.
• MB-Approval 229.51.
• Meets VW Standard 504 00, VW Standard 507 00 and Porsche C30.

• A top quality “Full SAPS”* passenger car motor oil that delivers excellent performance and protection when lubricating today’s engines.
• Meets ACEA A3/B4 and is also suitable for use where API SN is specified.
• Suitable for use in vehicles which specify the following OEM specifications: BMW LL-01, MB 229.3 / 229.5, Porsche A40, Renault RN0700 / RN0710, Volkswagen 502 00 / 505 00.