Excluding the regions of Crimea, Donetsk and Luhansk
Petro-Canada™ Lubricants' distribution network extends to over 80 countries worldwide
Maxiumum Air Discharge: 50˚C/122˚F, Temperature Recommended Service Hours: 16,000 h
Maximum Air Discharge Temperature: 100˚C/212˚F
Recommended Service Hours: 8,000 h
A few more steps
COMPRO™ fluids are ashless air compressor fluids designed to provide long and highly reliable service life in industrial air compressor applications.
Show moreAvailable in viscosity grades 32 and 68.
COMPRO™ XL-S fluids resist oxidative breakdown better than some leading synthetic PAO based fluids.
Show moreProvides up to 8,000 hours of continuous service in rotary screw compressors.
Available in viscosity grades 32, 46, 68, 100 and 150.
COMPRO™ E fluids are fully synthetic, high performance ester based lubricants designed to provide superior protection in rotary screw, rotary vane, centrifugal, and reciprocating air compressors.
Ester based fluids that are compatible with mineral oil products and with standard rubbers/elastomers used in most compressor components.
Available in viscosity grades 46, 68, 100 and 150.
COMPRO™ fluids are ashless air compressor fluids designed to provide long and highly reliable service life in industrial air compressor applications.
Available in viscosity grades 32 and 68.
COMPRO™ XL-S fluids resist oxidative breakdown better than some leading synthetic PAO based fluids.
Provides up to 8,000 hours of continuous service in rotary screw compressors.
Available in viscosity grades 32, 46, 68, 100 and 150.
COMPRO™ Synthetic fluids are specifically designed for compressors operating at very high or lower temperatures or in severe service applications.
Formulated from a custom blend of polyalkylene glycol (PAG) and ester fluids, combined with an effective inhibitor package.
Optimum viscosity grade for rotary screw air compressors is ISO VG 32.
Reference Tech Bulletin TB-1217.
Formulated with SynFX™, an advanced additive technology designed to deliver synthetic-like performance to provide longer lasting protection.
Outstanding oxidation resistance.
4000 hour service in rotary screw compressors, and service per OEM guidelines in vane compressors.
Provides protection against rust and corrosion.
Available in ISO VG 46, 100.
NSF H1 Registered.
Synthetic PAO based product.
Extends service life up to 4000 hours service in rotary screw compressors at wide temperatures.
Outstanding oxidation resistance.
Controls sludge and varnish in pneumatic and hydraulic systems.
Available in ISO VG 46, 100.
NSF H1 Registered.
REFLO™ CFC is a highly refined naphthenic oil formulated for use in systems using chlorinated fluorocarbon (CFC) refrigerants such as R11, R12, R-113, R-114, and R-115.
Can also be used in ammonia refrigeration systems where evaporating temperatures are as low as -31°C/-24°F.
REFLO™ 46A and 68A are formulated from pure paraffinic base stocks and provide exceptional service in ammonia refrigeration systems.
Show moreWith proper change-out procedures, may result in reduced oil carry over and lower fluid consumption.
Available in viscosity grades 46 and 68.
REFLO™ XL Synthetic Blend delivers reliable, long-term performance in ammonia refrigeration systems.
Show moreStrong thermal and oxidation stability delivers reduced fluid breakdown, leading to longer fluid life for fewer change-outs and reduced costly downtime.
Delivers very strong low temperature fluidity and can be used in ammonia refrigeration systems where evaporator temperatures are greater than -42°C/-44°F.
Specially formulated with seal swell agent for reduced seal shrinkage.
Improved anti-wear capabilities for longer equipment life.
REFLO™ Synthetic 68A is a PAO formulated to lubricate ammonia refrigeration compressors used in large commercial operations such as cold stores, marine systems and food processing plants. PAO, specially formulated with seal swell agent.
Show moreExcellent performance at extreme low temperatures such as in blast freezers that have very low evaporator temperatures (-51°C/-60°F or above).
Stability is improved over some competitive synthetic oils.
Product is compatible with common elastomers, paints and plastics.
NG™ CompOil AW is for use in both the frame and cylinders / packings of reciprocating compressors, these products are intended for sweet, mostly light natural gas service at discharge pressures <2000 psig.
These fluids can also be used in the crankcase frame where an R&O type fluid is recommended by the OEM.
Non-detergent formulation with excellent water separation properties.
Available in ISO 150 and 220 viscosity grades.
SPX™ 7220 is recommended for compression of heavy hydrocarbon and water contaminated natural gas streams, as well as the compression of dry Natural gas with CO2 and H2S.
Show morePolyglycol synthetic lubricants provide a much lower gas solubility than standard mineral oils, which reduces viscosity dilution and greatly improves the separation of lubricant from the process gas.
Available in ISO 220 grade.
SPX™ 7000 is recommended for compression of select hydrocarbon mixtures, sour natural gas and acid gas; use in gas re-injection service.
Show morePolyglycol synthetic lubricants provide a much lower gas solubility than standard mineral oils, which reduces viscosity dilution and greatly improves the separation of lubricant from the process gas.
Available in ISO 150 grade.
SPX™ 7220 is recommended for compression of heavy hydrocarbon and water contaminated natural gas streams, as well as the compression of dry Natural gas with CO2 and H2S.
Polyglycol synthetic lubricants provide a much lower gas solubility than standard mineral oils, which reduces viscosity dilution and greatly improves the separation of lubricant from the process gas.
Available in ISO 220 grade.
Compressor Oil™ RP 268 is recommended for use in compressing sour, wet or contaminated natural gas.
Show moreProvides excellent high-temperature stability.
Very good lubricity and wear protection.
Minimizes deposit formation.
Compressor Oil™ RP 460 is recommended for use in compressing sour, wet or contaminated natural gas.
Show moreSuited for use in higher-pressure applications.
Provides excellent high-temperature stability.
Very good lubricity and wear protection.
Minimizes deposit formation.
SPX™ 5000 is suitable for the compression of propane in refrigeration service.
Effective lubrication of cylinders and packings in Mycom reciprocating refrigeration compressor.
Recommended for compression of light sweet hydrocarbon gas mixtures.
Available in ISO 150 viscosity grades.
SPX™ 7100 and 7000 are recommended for compression of select hydrocarbon mixtures, sour natural gas and acid gas; use in gas re-injection service.
Show morePolyglycol synthetic lubricants provide a much lower gas solubility than standard mineral oils, which reduces viscosity dilution and greatly improves the separation of lubricant from the process gas.
Available in ISO 100 and ISO 150 viscosity grades.
NG™ Screw CompOil is designed for use in flooded screw compressors in natural gas production and service.
Show moreThe additive system is compatible with sour (H2S) hydrocarbon gas systems.
Recommended for compression of the lightest hydrocarbon gases (methane and ethane) where the expected dilution is <10 wt%, and discharge temperatures are moderate (<99 °C / 210 °F).
Excellent performance and protection from corrosion in harsh natural gas streams.
Available in ISO 100 and ISO 150 viscosity grades.
COMPRO™ air compressor fluids provide long and highly reliable service life.
Compressor Oils™ RP 268 and RP 460 natural gas compressor fluids provide excellent high temperature stability, good lubricity and wear protection.
REFLO™ refrigeration compressor fluids ensure optimum performance in commercial refrigeration compressor systems.
SPX™ 5000, 7000, 7100 and 7220 natural gas compressor fluids provide excellent lubrication and cooling for reciprocating and rotary screw compressors.
NG™ CompOil AW 150 and 220 provide a non-detergent compressor fluid formulation with excellent water-separation properties.
NG™ Screw CompOil 100 and 150 provide excellent performance and protection from corrosion in harsh natural gas streams.
Consult a Technical Services Advisor to confirm the correct lubricant application.
