Applications

• Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
• May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
• May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
• NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

• Successfully evaluated against Bosch Rexroth requirements
• Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

• Recommended for use in equipment manufactured by Denison

Dynex

• Recommended for use in equipment manufactured by Dynex

Eaton

• Approved for Eaton E-FDGN-TB002-E
• Recommended for use in equipment manufactured by Eaton Vickers

Hydreco

• Recommended for use in equipment manufactured by Hydreco

Komatsu

• Recommended for use in equipment manufactured by Komatsu

Oilgear

• Recommended for use in equipment manufactured by Oilgear

Racine

• Recommended for use in equipment manufactured by Racine

Sauer-Danfoss

• Recommended for use in equipment manufactured by Sauer-Danfoss

Industrial Standards

Meets:

• DIN 51524 Part 2 HLP
• ISO 11158 HM
• ASTM D6158 HM

Applications

• Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
• May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
• May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
• NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

• Successfully evaluated against Bosch Rexroth requirements
• Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

• Approved for Denison HF-0
• Recommended for use in equipment manufactured by Denison

Dynex

• Recommended for use in equipment manufactured by Dynex

Eaton

• Approved for Eaton E-FDGN-TB002-E
• Recommended for use in equipment manufactured by Eaton Vickers

Fives Cincinnati

• Approved for Fives Cincinnati P-68

Hydreco

• Recommended for use in equipment manufactured by Hydreco

Komatsu

• Recommended for use in equipment manufactured by Komatsu

Oilgear

• Recommended for use in equipment manufactured by Oilgear

Racine

• Recommended for use in equipment manufactured by Racine

Sauer-Danfoss

• Recommended for use in equipment manufactured by Sauer-Danfoss

Voith

• Recommended for Voith 3625-006072, 3625-006073, and 3625-008426

Industrial standards

Meets:

• DIN 51524 Part 2 HLP
• ISO 11158 HM
• ASTM D6158 HM

Suitable for use:

• AIST 126 and 127

Applications

• Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
• May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
• May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
• NSF H2 listed (no allowable food contact)

OEM Approvals

Arburg

• Recommended for use in injection moulding equipment manufactured by Arburg

Battenfeld

• Recommended for use in injection moulding equipment manufactured by Battenfeld

Bosch Rexroth

• Successfully evaluated against Bosch Rexroth requirements
• Recommended for use in equipment manufactured by Bosch-Rexroth

Demag

• Recommended for use in injection moulding equipment manufactured by Demag

Denison

• Approved for Denison HF-0
• Recommended for use in equipment manufactured by Denison

Dynex

• Recommended for use in equipment manufactured by Dynex

Eaton

• Approved for Eaton E-FDGN-TB002-E
• Recommended for use in equipment manufactured by Eaton Vickers

Engel

• Approved for use in Engel injection moulding machines

Fives Cincinnati

• Approved for Fives Cincinnati P-70

Husky

• Recommended for use in injection moulding equipment manufactured by Husky

Hydreco

• Recommended for use in equipment manufactured by Hydreco

Komatsu

• Recommended for use in equipment manufactured by Komatsu
• Meets the requirements of the Komatsu HPV35+35 pump test

Krauss-Maffei

• Recommended for use in injection moulding equipment manufactured by Krauss-Maffei

Netstal

• Recommended for use in injection moulding equipment manufactured by Netstal

Oilgear

• Recommended for use in equipment manufactured by Oilgear

Racine

• Recommended for use in equipment manufactured by Racine

Raymond

• Recommended for use in Raymond lift trucks and forklifts

Sauer-Danfoss

• Recommended for use in equipment manufactured by Sauer-Danfoss

Soplar

• Recommended for use in injection moulding equipment manufactured by Soplar

Voith

• Recommended for Voith 3625-006208 and 3625-006209

Industrial standards

Meets:

• DIN 51524 Part 2 HLP
• ISO 11158 HM
• ASTM D6158 HM

Suitable for use:

• AIST 126 and 127
• JCMAS HK

Applications

• Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
• May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
• May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
• NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

• Successfully evaluated against Bosch Rexroth requirements
• Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

• Approved for Denison HF-0
• Recommended for use in equipment manufactured by Denison

Dynex

• Recommended for use in equipment manufactured by Dynex

Eaton

• Approved for Eaton E-FDGN-TB002-E
• Recommended for use in equipment manufactured by Eaton Vickers

Fives Cincinnati

• Approved for Fives Cincinnati P-69

Hydreco

• Recommended for use in equipment manufactured by Hydreco

Komatsu

• Recommended for use in equipment manufactured by Komatsu

Marlen

• Approved for use in Marlen Hydraulic Power Units

Oilgear

• Recommended for use in equipment manufactured by Oilgear

Racine

• Recommended for use in equipment manufactured by Racine

Sauer-Danfoss

• Recommended for use in equipment manufactured by Sauer-Danfoss

Industrial standards

Meets:

• DIN 51524 Part 2 HLP
• ISO 11158 HM
• ASTM D6158 HM

Suitable for use:

• AIST 126 and 127

Applications

• Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
• May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
• May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
• NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

• Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

• Recommended for use in equipment manufactured by Denison

Dynex

• Recommended for use in equipment manufactured by Dynex

Eaton

• Recommended for use in equipment manufactured by Eaton Vickers

Hydreco

• Recommended for use in equipment manufactured by Hydreco

Komatsu

• Recommended for use in equipment manufactured by Komatsu

Oilgear

• Recommended for use in equipment manufactured by Oilgear

Racine

• Recommended for use in equipment manufactured by Racine

Sauer-Danfoss

• Recommended for use in equipment manufactured by Sauer-Danfoss

Applications

• Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
• May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
• May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
• NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

• Successfully evaluated against Bosch Rexroth requirements
• Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

• Recommended for use in equipment manufactured by Denison

Dynex

• Recommended for use in equipment manufactured by Dynex

Eaton

• Approved for Eaton E-FDGN-TB002-E
• Recommended for use in equipment manufactured by Eaton Vickers

Hydreco

• Recommended for use in equipment manufactured by Hydreco

Komatsu

• Recommended for use in equipment manufactured by Komatsu

Oilgear

• Recommended for use in equipment manufactured by Oilgear

Racine

• Recommended for use in equipment manufactured by Racine

Sauer-Danfoss

• Recommended for use in equipment manufactured by Sauer-Danfoss

Voith

• Recommended for Voith 3625-006101

Industrial standards

Meets:

• DIN 51524 Part 2 HLP
• ISO 11158 HM

Suitable for use:

• ASTM D6158 HM