Find your Country and language
Lubricants Beyond Today's Standards TM
Petro-Canada™ Lubricants' distribution network extends to over 80 countries worldwide
VULTREX™ GEAR SHIELD® NC is a semi-fluid high-viscosity base fluid combined with EP and oxidation-resistant additives designed for the open gear systems found in many types of ore-crushing mills, including ball, rod and SAG (Semi Autogenous Grinding) mills, as well as kilns and dryers. It meets the requirements of most major mill and gear manufacturers, including UBE, Koppers, Falk, Dominion, Boliden-Allis, Metso (Svedala) and Fuller.
Typical characteristics are shown below:
|
VULTREX™ GEAR SHIELD® NC |
|
|---|---|
|
Color |
Black |
|
Viscosity @40°C, cSt |
4765 |
|
Flash point, COC, °C |
>121 |
|
Mobility, 0°C, g/s |
0.03 |
|
Lincoln Ventmeter, 0°C, psig |
600 |
|
4-ball wear, scar diameter, mm |
0.49 |
|
4-ball weld point, kg |
400 |
|
Load wear index |
77 |
|
FZG Passing Load Stage, A/8.3/90 |
>12 |
VULTREX™ ROCK DRILL EP000 is a lithium semi-fluid grease specially formulated to reduce airborne oil concentration in air-operated rock drills and similar mining equipment versus typical rock drill oils. It meets the requirements of rock drill manufacturers, such as Ingersoll-Rand, Joy and Parts Headquarters. VULTREX™ ROCK DRILL EP000 can be applied easily at low temperatures in the 0°C to 5°C (32°F to 41°F) range and field testing has confirmed it still flows down to -20°C/-4°F.
Typical characteristics are shown below:
|
VULTREX™ ROCK DRILL EP000 |
|
|---|---|
|
Soap Type |
Lithium |
|
Color |
Dark Amber |
|
Worked Penetration @ 25°C |
458 |
|
Dropping point, °C / °F |
158/316 |
|
Base Oil Viscosity, cSt @ 40°C |
129 |
|
Base Oil Viscosity, cSt @ 100°C |
13.1 |
|
Weld point, kg |
200 |
|
Operating Range, °C |
-20 to 100 |
|
Operating Range,°F |
-4 to 212 |
|
Minimum Dispensing Temperature, °C/°F |
-20/-4 |
VULTREX™ DRILL ROD HEAVY is a barium complex grease recommended for use on diamond drill rods where it reduces friction between the rod and rock strata. This tenacious, long fibre barium grease has lubricated successfully to more than 2000 foot drill depths without wash off or wipe off.
Typical characteristics are shown below:
|
VULTREX™ DRILL ROD HEAVY |
|
|---|---|
|
Soap Type |
Barium Complex |
|
Color |
Green/Brown |
|
Worked Penetration @ 25°C |
225 |
|
Dropping point, °C / °F |
206/403 |
|
Base Oil Viscosity, cSt @ 40°C |
161 |
|
Four Ball EP Weld, kg |
315 |
|
Four ball EP weld Load Wear Index, kg |
44 |
|
Water spray-off, % loss |
7 |
|
Operating Range, °C |
-12 to 135 |
|
Operating Range,°F |
10 to 275 |
