Petro-Canada Lubricants ENVIRON™ MV fluids are ashless (free of zinc and other heavy metals), non-toxic, inherently biodegradable and recyclable hydraulic fluids particularly suited for hydraulic applications in environmentally sensitive locations. ENVIRON™ MV fluids are premium multigrade anti-wear hydraulic fluids designed for year-round use in both mobile and stationary heavy-duty hydraulic systems operating in wide extremes of temperature. ENVIRON™ MV is formulated to provide excellent anti-wear protection for extended equipment life. Its exceptional oxidation stability provides long oil life for fewer change-outs and helps prevent sludge and varnish deposits.

ENVIRON™ MV fluids are approved against the following hydraulic equipment manufacturers specifications: Denison HF-0, HF-1 and HF-2, Danfoss (Eaton) Brochure 03-401-2010 Rev 1 and Arburg (MV 46).

ENVIRON™ MV fluids are also suitable for use in equipment manufactured by Bosch Rexroth, Komatsu, Dynex, Hydreco, Oilgear, Marlen and others.

ENVIRON™ MV fluids meet the requirements of ISO 11158 HV, DIN 51524 Part 3 HVLP and ASTM D6158 HV.

All ENVIRON™ MV fluids are NSF H2 registered (no allowable food contact).

Typical characteristics are shown below:

¹ Start-up is defined as the temperature at which the oil dynamic viscosity reaches 10,000 cP.

² Operating temperature limits are determined by the equipment manufacturer. Petro-Canada Lubricants has chosen to define the upper operating temperature to be the after-shear oil kinematic viscosity of 10 cSt for mobile equipment and 13 cSt for industrial machinery, while the lower operating temperature to be the fresh oil dynamic viscosity of 750 cP for both mobile and industrial machinery.

These ranges are only an approximation and the operator should always check the viscosity requirements as specified by their equipment manufacturer. Mobile equipment typically refers to machinery that encompasses a transmission and braking system to allow and prohibit movement. Industrial machinery is typically stationary, with hard piping and auxilliary components in place.

Petro-Canada Lubricants ENVIRON™ MV R fluids are ashless (free of zinc and other heavy metals), non-toxic, readily biodegradable and recyclable hydraulic fluids particularly suited for hydraulic applications in environmentally sensitive locations. ENVIRON™ MV R premium multigrade hydraulic fluids are designed for year-round use in a variety of piston, gear and vane hydraulic pumps found in both mobile and stationary heavy-duty hydraulic systems, operating in wide extremes of temperatures and in environmentally sensitive areas. They are well suited for hydraulic systems in hydroelectric dam operations.

ENVIRON™ MV R hydraulic fluids are formulated with a carefully selected ashless chemistry offering excellent anti-wear protection for extended equipment life as well as exceptional oxidation stability for long oil life,fewer change-outs and better sludge and varnish control.

ENVIRON™ MV R fluids are approved against the following hydraulic equipment manufacturers specifications: Denison HF-0, HF-1 and HF-2, and Danfoss (Eaton) Brochure 03-401-2010 Rev 1.

ENVIRON™ MV R fluids are also suitable for use in equipment manufactured by Bosch Rexroth, Komatsu, Dynex, Hydreco, Oilgear, Marlen and others. They are suitable for use in hydraulic pumps with silver bearing, such as Lucas pumps, as their formulation does not contain zinc-based antiwear additives and will not displace the silver in these bearings.

ENVIRON™ MV R fluids meet the requirements of ISO 11158 HV, DIN 51524 Part 3 HVLP and ASTM D6158 HV.

Typical characteristics are shown below:

The values quoted above are typical of normal production. They do not constitute a specification.

¹ Start-up is defined as the temperature at which the oil dynamic viscosity reaches 10,000 cP.

² Operating temperature limits are determined by the equipment manufacturer. Petro-Canada Lubricants has chosen to define the upper operating temperature to be the after-shear oil viscosity of 10 cSt for mobile equipment and 13 cSt for industrial machinery, while the lower operating temperature to be the fresh oil viscosity of 750 cP for both mobile and industrial machinery. These ranges are only an approximation and the operator should always check the viscosity requirements as specified by their equipment manufacturer. Mobile equipment typically refers to machinery that encompasses a transmission and braking system to allow and prohibit movement. Industrial machinery is typically stationary, with hard piping and auxilliary components in place.

³ According to GHS, a substance is “not environmentally toxic” if LC50 and EC50 values for OECD 201, 202 and 203 are >100 mg/L.