Canada
About UsContact UsWhere To Buy
SENTRON Low Ash Products

SENTRON™ Low Ash

Premium oils with between 0.1% and 0.6% weight ash

Petro-Canada offers an extensive line of SENTRON Low Ash Products. SENTRON Stationary Gas engine oils are premium performance, long-life engine oils for stationary gas engines and compressors in a wide variety of applications.

  • Extended oil life and excellent control of engine deposits
  • Exceptional overall engine protection for maximum reliability and savings
  • Advanced piston cleanliness
  • Verified and approved by many OEMs

Suitable for 4-stroke cycle gas engines requiring a Low Ash product with either traditional or non-traditional gas sources

SENTRON Low Ash

SENTRON VLA 40 (0.3% wt ash)

SENTRON VLA 40 is a "very" low ash stationary gas engine oil designed for engines running at low loads (<60%)


Applications

SENTRON VLA 40 is recommended primarily for low-loaded four-stroke engines.


OEM Approvals

For a list of current OEM approvals for the SENTRON product line please refer to our OEM approval table linked at the top of this page.

SENTRON LD 8000 (0.52% wt ash)

SENTRON LD 8000 provides revolutionary performance of up to 300%[1] longer drain intervals over the leading global conventional competitor. SENTRON LD 8000 contains a specialized additive mix that provides greater TBN retention to help neutralize acids that can attack liner surfaces. SENTRON LD 8000 helps prevent deposits from ash and worn metal parts – deposits that could otherwise result in higher oil consumption.


Applications

A premium Low Ash SAE 40 lubricant, suitable for use in 4–stroke engines operating on natural pipeline gas, pre-treated sewage/biogas and selective pre-treated process gases.


OEM Approvals

For a list of current OEM approvals for the SENTRON product line please refer to our OEM approval table linked at the top of this page.

SENTRON LD 5000 (0.60% wt ash)

SENTRON LD 5000 provides excellent performance for up to 200%[2] longer drain intervals and exceptional overall engine protection for maximum reliability and savings. SENTRON LD 5000 helps provide reduced valve recession and controls wear of piston rings, cylinder liners and bearings for prolonged engine life vs. competitive oils.


Applications

Petro-Canada recommends SENTRON LD 5000 for use in Caterpillar, GE (Jenbacher/Waukesha) and many turbocharged or naturally aspirated, stoichiometric or lean burn engines that require a Low Ash natural gas engine oil.


OEM Approvals

For a list of current OEM approvals for the SENTRON product line please refer to our OEM approval table linked at the top of this page.

SENTRON LD 3000 (0.47% wt ash)

SENTRON LD 3000 helps provide a high level of performance in high output turbocharged engines that prefer a Low Ash oil. It provides excellent control of engine deposits, even when there is a need for added high temperature deposit control.


Applications

Recommended for most 4-stroke and some 2-stroke gas engines. It is suitable for use in engines fitted with catalytic converters. It is also suitable for severe service applications including high output, turbocharged engines that encounter high exhaust gas temperatures. The result can be significantly less valve sticking for reduced backfiring in these severe applications.


OEM Approvals

For a list of current OEM approvals for the SENTRON product line please refer to our OEM approval table linked at the top of this page.

SENTRON CG 40 PLUS (0.52% wt ash)

SENTRON CG 40 PLUS provides excellent control of deposits and other issues caused by high halogen gas levels produced by landfills. Unlike conventional landfill / biogas / sewer gas engine oils, SENTRON CG 40 PLUS is specifically designed to address current and future engines running in this severe contaminated gas application where higher BMEP engines are used.


Applications

SENTRON CG 40 PLUS is a uniquely designed Low Ash formula for 4-stroke gas engines running in severe service landfill gas operations.


OEM Approvals

For a list of current OEM approvals for the SENTRON product line please refer to our OEM approval table linked at the top of this page.

SENTRON LD Synthetic BLEND (0.51% wt ash)

A 15W-40 multigrade extension of the SENTRON line, formulated as a Synthetic blend to extend drain intervals and give better low temperature performance in comparison to mono-grade SAE 40's.


Applications

SENTRON LD Synthetic BLEND has low temperature starting capabilities down to -20°C. Field trial results have shown outstanding piston cleanliness which may result in longer equipment life and less downtime.


OEM Approvals

For a list of current OEM approvals for the SENTRON product line please refer to our OEM approval table linked at the top of this page.

SENTRON VTP 10W-40 (0.54% wt ash)

Specially formulated to meet the demands of stationary natural gas engines for exceptional cleanliness of the engine through all seasons.


Applications

Recommended for use in natural gas fueled engines that require high zinc for improved valve train wear while providing excellent cold start capability. SENTRON VTP 10W-40 is suitable for use in applications where Cummins CES20074-2012 is specified.


OEM Approvals

For a list of current OEM approvals for the SENTRON product line please refer to our OEM approval table linked at the top of this page.

SENTRON VTP 0W-30 (0.58% wt ash)

A Low Ash, Synthetic blend gas engine oil formulated specifically as an all season solution for small to mid-sized engines that are difficult to start in severe winter conditions.


Applications

All the features of SENTRON VTP10W-40 formulated for use in cold climates. Ideal for extreme cold starts / cold flow pumpability (<-35°C/ <-31°F).


OEM Approvals

For a list of current OEM approvals for the SENTRON product line please refer to our OEM approval table linked at the top of this page.

OEM Approval

OEM: SENTRONTM

DownloadPDF

(PDF, 90 KB)

Featured Resources

All resourcesfor this product line
Case Study

“We increased our drain intervals from 1,000 hours to 2,000 hours.”

Young Min Lee,
Manager, Choongnam City Gas, Daejeon, South Korea

ReadCase Study
Case Study

“Switching to SENTRON LD 5000 set new standards for drain intervals.”

John Busl,
Co-Owner Biogas Aholfing GmbH & Co. KG

ReadCase Study
Brochure
Plant operations

Gas Plant & Pipeline Lubricants

DownloadPDF

(PDF, 3 MB)

Related Product Lines

PC GasComp

View
BC_NG-Screw-Compoil

TURBOFLO™ XL

View
TURBOFLO XL

Get the latest SENTRON™ Low Ash product info and more.

Join our subscribers. It's free. Unsubscribe anytime.

By submitting this form, you agree to the storage and handling of this data in accordance with our Privacy Policy.

Welcome and thanks for joining.

You're all set to start getting the latest content in your inbox.

Our Promise Sustainability Careers Contact Us Where To Buy Order Online Tradeshows
TMOwned or used under license. ©2024 Petro‐Canada Lubricants Inc., all rights reserved.