ENDURATEX™ Synthetic OHV (Off-Highway Vehicle) 680 is a premium performance, extreme pressure lubricant.

Formulated using PAO and ester-based technology, this product is a premium performance, extreme pressure lubricant that is capable of withstanding severe load conditions, helping to reduce wear so that component life is maximized.

It is approved by General Electric for the lubrication of both DC and AC motorized wheel gearbox applications in off highway haul trucks.

Also suitable for use in stationary gearbox applications requiring an ISO 680 viscosity grade.

HARNEX™ 320 wind turbine gear oil is designed using polyalphaolefin (PAO) chemistry that delivers good oil film thickness over a broad temperature range.

Withstands oxidative and thermal breakdown at elevated temperatures.

Effective water separation.

Excellent low temperature fluidity ensures smooth cold temperature operation.

Protects against micro-pitting & scuffing of gear teeth.

Protects against rust and corrosion.

Credentials

• Meets following specifications:
  – AGMA 9005-F16.
  – DIN 51517-3 (CLP 320).
  – ISO 12925-1 Type CKD
  – Approved by GE as a service refill oil for GE wind turbines, with Winergy gearboxes (Platform 1.x, 2.x)
  – Approved for use in Moventas wind turbine gearboxes
• HARNEX™ 320 meets the technical requirements of Shanghai Electric, and is approved for use in any gear box on a Shanghai Electric wind turbine. Please contact a Petro-Canada Lubricants Technical Services Advisor for additional information.

ENDURATEX™ EP gear oils deliver sustained anti-wear and extreme pressure protection to all industrial gear drives and bearings.

Available in 68, 100, 150, 220, 320, 460 and 680 viscosity grades.

ENDURATEX™ EP gear oils are typically suitable for use in situations requiring DIN 51517 Part 3, ISO 12925 - Type 1 CKC, AGMA 9005-F16, and AIST 224 (formerly US Steel 224) specifications.

ENDURATEX™ XL Synthetic Blend multigrade EP gear oils are designed to eliminate seasonal change-outs and provide equipment protection all year long.

Recommended for lubricating oil filled pump jack gearboxes and other industrial gearbox applications.

Excellent low temperature properties, which allow it to be used in all but the most extreme conditions.

Available in ISO VG 100 (ENDURATEX™ XL 68/150) and ISO VG 150 (ENDURATEX™ XL 68/220).

ENDURATEX™ Synthetic EP gear oils are premium performance, extreme pressure lubricants that use advanced synthetic base oils and additive technologies to deliver reduced friction, excellent low temperature fluidity and outstanding oxidative and thermal stability, which can mean extended fluid and component life.

Available in 150, 220, 320 and 460 viscosity grades.

ENDURATEX™ Synthetic EP 150, 220, 320, 460 oils are listed on Flender Gear Units and Geared Motors T7300 Approved Lubricants List and are suitable for use in GE 787/788 drive systems.

Meets Flender’s micropitting protection performance requirements.

HARNEX™ 320 wind turbine gear oil is designed using polyalphaolefin (PAO) chemistry that delivers good oil film thickness over a broad temperature range.

Withstands oxidative and thermal breakdown at elevated temperatures.

Effective water separation.

Excellent low temperature fluidity ensures smooth cold temperature operation.

Protects against micro-pitting & scuffing of gear teeth.

Protects against rust and corrosion.

Credentials

• Meets following specifications:
  – AGMA 9005-F16.
  – DIN 51517-3 (CLP 320).
  – ISO 12925-1 Type CKD
  – Approved by GE as a service refill oil for GE wind turbines, with Winergy gearboxes (Platform 1.x, 2.x)
  – Approved for use in Moventas wind turbine gearboxes
• HARNEX™ 320 meets the technical requirements of Shanghai Electric, and is approved for use in any gear box on a Shanghai Electric wind turbine. Please contact a Petro-Canada Lubricants Technical Services Advisor for additional information.

SYNDURO™ SHB fluids are designed to deliver excellent component protection for equipment operating at high speed or mild EP loads over a wide temperature range during extended service intervals.

Available in 32, 46, 68, 100, 150, 220, 320 and 460 viscosity grades.

High-quality synthetic multifunctional lubricant suitable for use in a wide range of industrial applications such as bearings, gears and compressors.

TURBOFLO™ R&O / Premium R&O 77 turbine oils are recommended for steam and gas turbines as well as circulating oil systems for a wide range of industrial machinery.

Minimizes corrosion and oxidation.

Extended resistance to oil breakdown caused by air and high temperatures.

Available for R&O Circulating Oil applications in viscosity grades: 10, 22, 32, 46, 68, 100, 150, 220, 320, 460 and Premium R&O 77.

Available for turbines in viscosity grades: 32, 46, 68, 100 and Premium R&O 77.

The R&O 10 and 22 viscosity grades are also suitable for use as spindle oils.

SYNDURO™ SHB fluids are designed to deliver excellent component protection for equipment operating at high speed or mild EP loads over a wide temperature range during extended service intervals.

Available in 32, 46, 68, 100, 150, 220, 320 and 460 viscosity grades.

High-quality synthetic multifunctional lubricant suitable for use in a wide range of industrial applications such as bearings, gears and compressors.

ENDURATEX™ Mild WG oils are Non-EP lubricants recommended for service in some enclosed worm gear reducers and reciprocating steam engines.

Formulated to provide high viscosity, high film strength, high flash point and rust protection.

Available in 460 and 680 viscosity grades.