Canada
About UsContact UsWhere To Buy

INDUSTRIAL LUBRICANTS

Turbine Fluids & Wind Turbine Gear Oils

Find the right turbine fluid & wind turbine gear oil

Does your power generation turbine (gas, steam, hydro) or industrial turbo compressor have a common gear and bearing lubrication system?

Does your machine suffer from varnish or laquer buildup?

Does the gearbox need FZG >= 10?

Is the oil exposed to temp> 100 degree C

A few more steps

Result

Bestmatch

TURBOFLO™ EP

TURBOFLO™ EP is a premium turbine fluid designed to provide exceptional wear protection of geared heavy-duty turbines with common gear and bearing lubrication systems.

Its outstanding thermal and oxidative stability also makes it an excellent choice for severe service gas and steam turbine applications.

Excellent oxidation stability provides extended drain capabilities even in extreme conditions.

Single fluid for steam and gas turbines in both geared and Non-geared applications.

Available in viscosity grades: 32 and 46.

Credentials

  • TURBOFLO™ EP fluids are suitable for use in steam and gas turbines requiring the following major manufacturer and industry specifications:
    • GEK 32568k, GEK 101941a, GEK 46506e
    • GE HTGD 90117
    • Siemens TLV 9013 04 and TLV 9013 05 (EP)
    • Solar ES 9-224
    • JIS K 2213 Type 2
    • Ansaldo Energia AD00020487 and TGO2-0171-E00000/J (EP)
    • ASTM Type I, II, and III (EP)
    • DIN 51515 Part 1 and 2

Bestmatch

TURBOFLO™ HTS

TURBOFLO™ HTS 46 is designed to exceed the service requirements of steam and gas turbines in the most rigorous operating environments.

It also exceeds stringent oxidative and thermal resistance requirements of OEMs for turbine oils.

Exceptional thermal stability results in extremely low amount of deposits with No tendency to form film compared to three top MAN-ES approved competitors.

With a Rotating Pressure Vessel Oxidation Test (RPVOT) result of more than 2,000 minutes, TURBOFLO™ HTS is proven to have excellent oxidation resistance. Strong protection against wear and scuffing to ensure longer component life and lower maintenance costs.

Available in viscosity grade 46.

Credentials

  • TURBOFLO™ HTS 46 is approved by MAN Energy Solutions for MAN Energy Solutions TED 10000494596.
  • TURBOFLO™ EP fluids are suitable for use in steam and gas turbines requiring the following major manufacturer and industry specifications:
    • GEK 32568k, GEK 101941a, GEK 46506e
    • GE HTGD 90117
    • Siemens TLV 9013 04 and TLV 9013 05 (EP)
    • Solar ES 9-224
    • JIS K 2213 Type 2
    • Ansaldo Energia AD00020487 and TGO2-0171-E00000/J (EP)
    • ASTM Type I, II, and III (EP)
    • DIN 51515 Part 1 and 2

Bestmatch

TURBOFLO™ EP

TURBOFLO™ EP is a premium turbine fluid designed to provide exceptional wear protection of geared heavy-duty turbines with common gear and bearing lubrication systems.

Its outstanding thermal and oxidative stability also makes it an excellent choice for severe service gas and steam turbine applications.

Excellent oxidation stability provides extended drain capabilities even in extreme conditions.

Single fluid for steam and gas turbines in both geared and Non-geared applications.

Available in viscosity grades: 32 and 46.

Credentials

  • TURBOFLO™ EP fluids are suitable for use in steam and gas turbines requiring the following major manufacturer and industry specifications:
    • GEK 32568k, GEK 101941a, GEK 46506e
    • GE HTGD 90117
    • Siemens TLV 9013 04 and TLV 9013 05 (EP)
    • Solar ES 9-224
    • JIS K 2213 Type 2
    • Ansaldo Energia AD00020487 and TGO2-0171-E00000/J (EP)
    • ASTM Type I, II, and III (EP)
    • DIN 51515 Part 1 and 2

Bestmatches

  • turboflo-lv

    TURBOFLO™ LV

    TURBOFLO™ LV is designed to lubricate and cool steam, gas and combined-cycle turbines and deliver excellent lubrication to bearings operating in severe conditions.

    Industry leading resistance to varnish and sludge formation which will contribute to optimum turbine performance and reliability.

    This product’s outstanding resistance to oxidation and thermal stability minimizes fluid breakdown caused by air and high temperatures.

    Available in viscosity grades: 32 and 46.

    Credentials

    • TURBOFLO™ LV fluids are suitable for use in steam, gas and combined-cycle turbines requiring the following manufacturer and industry specifications:
      • GEK 32568k and GEK 46506e
      • GE HTGD 90117
      • Siemens TLV 9013 04 and TLV 9013 05 (Non EP)
      • Solar ES 9-224
      • JIS K 2213 Type 2
      • Ansaldo Energia AD00020487 and TGO2-0171-E00000/J
      • ASTM Type I and III
      • DIN 51515 Part 1 and 2
  • turboflohts

    TURBOFLO™ HTS

    TURBOFLO™ HTS 46 is designed to exceed the service requirements of steam and gas turbines in the most rigorous operating environments.

    It also exceeds stringent oxidative and thermal resistance requirements of OEMs for turbine oils.

    Exceptional thermal stability results in extremely low amount of deposits with No tendency to form film compared to three top MAN-ES approved competitors.

    With a Rotating Pressure Vessel Oxidation Test (RPVOT) result of more than 2,000 minutes, TURBOFLO™ HTS is proven to have excellent oxidation resistance. Strong protection against wear and scuffing to ensure longer component life and lower maintenance costs.

    Available in viscosity grade 46.

    Credentials

    • TURBOFLO™ HTS 46 is approved by MAN Energy Solutions for MAN Energy Solutions TED 10000494596.
    • TURBOFLO™ EP fluids are suitable for use in steam and gas turbines requiring the following major manufacturer and industry specifications:
      • GEK 32568k, GEK 101941a, GEK 46506e
      • GE HTGD 90117
      • Siemens TLV 9013 04 and TLV 9013 05 (EP)
      • Solar ES 9-224
      • JIS K 2213 Type 2
      • Ansaldo Energia AD00020487 and TGO2-0171-E00000/J (EP)
      • ASTM Type I, II, and III (EP)
      • DIN 51515 Part 1 and 2

Bestmatches

  • turboflo-xl

    TURBOFLO™ XL

    TURBOFLO™ XL is a premium turbine fluid designed to lubricate and cool heavy-duty steam, hydraulic and gas turbines and deliver excellent lubrication to bearings operating in severe conditions.

    Excellent oxidation and thermal stability provides extended drain capabilities even in extreme conditions.

    Extremely rapid air and gas separation.

    Exceptional resistance to fluid breakdown caused by air and high temperatures.

    Available in viscosity grades: 32, 46 and 68.

    Credentials

    • TURBOFLO™ XL fluids are suitable for use in steam and gas turbines requiring the following manufacturer and industry specifications:
      • GEK 32568k and GEK 46506e
      • GE HTGD 90117
      • Siemens TLV 9013 04 and TLV 9013 05 (Non EP)
      • Solar ES 9-224
      • JIS K 2213 Type 2
      • Ansaldo Energia AD00020487 and TGO2-0171-E00000/J
      • ASTM Type I and III
      • DIN 51515 Part 1 and 2
  • turboflo-ro

    TURBOFLO™ R&O, PREMIUM R&O 77

    TURBOFLO™ R&O and PREMIUM R&O 77 are primarily recommended for steam and gas turbines, hydro turbines as well as circulating oil systems for a wide range of industrial machinery.

    Minimizes corrosion and oxidation.

    Extended resistance to oil breakdown caused by air and high temperatures. Turboflo™ R&O is the first choice for hydro turbines because of its excellent rust protection.

    Available for turbines in viscosity grades: 32, 46, 68 and Premium R&O 77.

    Credentials

    • TURBOFLO™ R&O Oils 32, 46, 68 and Premium R&O 77 are suitable for use in various turbines requiring the following manufacturer and industry specifications:
      • GEK 32568k and GEK 46506e
      • GE HTGD 90117
      • Siemens TLV 9013 04 (Non EP)
      • Solar ES 9-224
      • JIS K 2213 Type 2
      • Ansaldo Energia AD00020487 and TGO2-0171-E00000/J
      • ASTM Type I
    • Premium R&O 77 meets National Defence Standard C-82-001-000/SF-001, Naval Steam Turbine and Main Gearing Lubrication Oil.

    Turboflo™ R&O is also available in ISO VG 10, 22, 100, 150, 220, 320, & 460 for other applications.

  • The TURBOFLO™ line of turbine and R&O fluids deliver excellent lubrication and cooling to steam, hydraulic and gas turbines and perform well as general purpose circulating oils in various industrial applications. They all exhibit excellent thermal and oxidative stability as well as excellent air and water separability.

Turbine Fluids & Wind Turbine Gear Oil Part Numbers

Previous Industrial Hydraulic Fluids

Next Stationary Gas Engine Oil

Our Promise Sustainability Careers Contact Us Where To Buy Order Online Tradeshows
TMOwned or used under license. ©2024 Petro‐Canada Lubricants Inc., all rights reserved.