HYDREX AW

HYDREX™ AW

For high-performance hydraulic systems

For high-performance hydraulic systems

  • Provides anti-wear protection for extended equipment life
  • Outstanding oxidation and thermal hydraulic oil stability extends drain intervals
  • Improved rust and corrosion prevention
  • Excellent water separability and hydrolytic stability
  • Excellent foam and air entrainment performance

  • Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
  • May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems

HYDREX AW

Applications

  • Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
  • May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Successfully evaluated against Bosch Rexroth requirements
  • Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

  • Recommended for use in equipment manufactured by Denison

Dynex

  • Recommended for use in equipment manufactured by Dynex

Eaton

  • Approved for Eaton E-FDGN-TB002-E
  • Recommended for use in equipment manufactured by Eaton Vickers

Hydreco

  • Recommended for use in equipment manufactured by Hydreco

Komatsu

  • Recommended for use in equipment manufactured by Komatsu

Oilgear

  • Recommended for use in equipment manufactured by Oilgear

Racine

  • Recommended for use in equipment manufactured by Racine

Sauer-Danfoss

  • Recommended for use in equipment manufactured by Sauer-Danfoss

Industrial Standards

Meets:

  • DIN 51524 Part 2 HLP
  • ISO 11158 HM
  • ASTM D6158 HM

Applications

  • Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
  • May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Successfully evaluated against Bosch Rexroth requirements
  • Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

  • Approved for Denison HF-0
  • Recommended for use in equipment manufactured by Denison

Dynex

  • Recommended for use in equipment manufactured by Dynex

Eaton

  • Approved for Eaton E-FDGN-TB002-E
  • Recommended for use in equipment manufactured by Eaton Vickers

Fives Cincinnati

  • Approved for Fives Cincinnati P-68

Hydreco

  • Recommended for use in equipment manufactured by Hydreco

Komatsu

  • Recommended for use in equipment manufactured by Komatsu

Oilgear

  • Recommended for use in equipment manufactured by Oilgear

Racine

  • Recommended for use in equipment manufactured by Racine

Sauer-Danfoss

  • Recommended for use in equipment manufactured by Sauer-Danfoss

Voith

  • Recommended for Voith 3625-006072, 3625-006073, and 3625-008426

Industrial standards

Meets:

  • DIN 51524 Part 2 HLP
  • ISO 11158 HM
  • ASTM D6158 HM

Suitable for use:

  • AIST 126 and 127

Applications

  • Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
  • May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Arburg

  • Recommended for use in injection moulding equipment manufactured by Arburg

Battenfeld

  • Recommended for use in injection moulding equipment manufactured by Battenfeld

Bosch Rexroth

  • Successfully evaluated against Bosch Rexroth requirements
  • Recommended for use in equipment manufactured by Bosch-Rexroth

Demag

  • Recommended for use in injection moulding equipment manufactured by Demag

Denison

  • Approved for Denison HF-0
  • Recommended for use in equipment manufactured by Denison

Dynex

  • Recommended for use in equipment manufactured by Dynex

Eaton

  • Approved for Eaton E-FDGN-TB002-E
  • Recommended for use in equipment manufactured by Eaton Vickers

Engel

  • Approved for use in Engel injection moulding machines

Fives Cincinnati

  • Approved for Fives Cincinnati P-70

Husky

  • Recommended for use in injection moulding equipment manufactured by Husky

Hydreco

  • Recommended for use in equipment manufactured by Hydreco

Komatsu

  • Recommended for use in equipment manufactured by Komatsu
  • Meets the requirements of the Komatsu HPV35+35 pump test

Krauss-Maffei

  • Recommended for use in injection moulding equipment manufactured by Krauss-Maffei

Netstal

  • Recommended for use in injection moulding equipment manufactured by Netstal

Oilgear

  • Recommended for use in equipment manufactured by Oilgear

Racine

  • Recommended for use in equipment manufactured by Racine

Raymond

  • Recommended for use in Raymond lift trucks and forklifts

Sauer-Danfoss

  • Recommended for use in equipment manufactured by Sauer-Danfoss

Soplar

  • Recommended for use in injection moulding equipment manufactured by Soplar

Voith

  • Recommended for Voith 3625-006208 and 3625-006209

Industrial standards

Meets:

  • DIN 51524 Part 2 HLP
  • ISO 11158 HM
  • ASTM D6158 HM

Suitable for use:

  • AIST 126 and 127
  • JCMAS HK

Applications

  • Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
  • May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Successfully evaluated against Bosch Rexroth requirements
  • Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

  • Approved for Denison HF-0
  • Recommended for use in equipment manufactured by Denison

Dynex

  • Recommended for use in equipment manufactured by Dynex

Eaton

  • Approved for Eaton E-FDGN-TB002-E
  • Recommended for use in equipment manufactured by Eaton Vickers

Fives Cincinnati

  • Approved for Fives Cincinnati P-69

Hydreco

  • Recommended for use in equipment manufactured by Hydreco

Komatsu

  • Recommended for use in equipment manufactured by Komatsu

Marlen

  • Approved for use in Marlen Hydraulic Power Units

Oilgear

  • Recommended for use in equipment manufactured by Oilgear

Racine

  • Recommended for use in equipment manufactured by Racine

Sauer-Danfoss

  • Recommended for use in equipment manufactured by Sauer-Danfoss

Industrial standards

Meets:

  • DIN 51524 Part 2 HLP
  • ISO 11158 HM
  • ASTM D6158 HM

Suitable for use:

  • AIST 126 and 127

Applications

  • Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
  • May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

  • Recommended for use in equipment manufactured by Denison

Dynex

  • Recommended for use in equipment manufactured by Dynex

Eaton

  • Recommended for use in equipment manufactured by Eaton Vickers

Hydreco

  • Recommended for use in equipment manufactured by Hydreco

Komatsu

  • Recommended for use in equipment manufactured by Komatsu

Oilgear

  • Recommended for use in equipment manufactured by Oilgear

Racine

  • Recommended for use in equipment manufactured by Racine

Sauer-Danfoss

  • Recommended for use in equipment manufactured by Sauer-Danfoss

Applications

  • Recommended for heavy duty hydraulic systems that operate in industrial plants and outdoors in mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or causing filter plugging
  • May also be used to lubricate anti-friction bearings and gears found in circulation, splash, bath and ring-oiled systems
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Successfully evaluated against Bosch Rexroth requirements
  • Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

  • Recommended for use in equipment manufactured by Denison

Dynex

  • Recommended for use in equipment manufactured by Dynex

Eaton

  • Approved for Eaton E-FDGN-TB002-E
  • Recommended for use in equipment manufactured by Eaton Vickers

Hydreco

  • Recommended for use in equipment manufactured by Hydreco

Komatsu

  • Recommended for use in equipment manufactured by Komatsu

Oilgear

  • Recommended for use in equipment manufactured by Oilgear

Racine

  • Recommended for use in equipment manufactured by Racine

Sauer-Danfoss

  • Recommended for use in equipment manufactured by Sauer-Danfoss

Voith

  • Recommended for Voith 3625-006101

Industrial standards

Meets:

  • DIN 51524 Part 2 HLP
  • ISO 11158 HM

Suitable for use:

  • ASTM D6158 HM
Case Study

“… Master Molded has virtually eliminated unscheduled downtime.”

Manny Garcia,
Plant Maintenance Engineer,
Master Molded Products, Elgin, IL, USA

ReadCase Study

Related Product Lines